Page 36 - Complete CRW Catalog

34 Stone, Tile, & Concrete Cleaning

CONCRETE, TILE AND GROUT CLEANING SYSTEM

Cleaning and Brightening Concrete Floors or hot water into a professional sprayer. For extreme soiling, mix
3-4 ounces of powder with a gallon of warm of hot water into a
CHEMICALS
1. For normal soiling, mix 32 ounces (1 quart) of Viper professional sprayer. For application through a Hydro-Force Inline
Peroxibright CTG with gallon of warm or hot water Injection Sprayer, mix 12 oz. of powder and fill container with water.
(1:4) into a professional sprayer. For heavy soiling, Use 1:4 dilution.
mix two quarts (64 ounces) of Viper Peroxibright
CTG with a gallon of warm or hot water (1:2) into a 2. Apply mixed solution with sprayer evenly and liberally across surface
professional sprayer. to be cleaned. If preferred, you can apply mixed solution with a damp
mop, sponge, or other appropriate professional equipment.
2. Apply mixed solution with sprayer evenly and
liberally across surface to be cleaned. You can use 3. Allow for 5 -10 minutes of dwell time. For concrete, if stains have been
a pump-up sprayer or a battery powered sprayer deeply absorbed, allow 15 minutes of dwell time so the solution has
like the Flexi-Pro. If preferred, you can apply mixed time to reach into the concrete pores and crevices and the oxygen
solution with a damp mop, sponge, or other appropriate professional activated effervescent solution can dissolve the soiling and lighten
equipment. discoloration.
3. For best results, agitate and extract cleaning solution using warm or 4. For best results, agitate and extract cleaning solution using warm or
hot water and a rotary agitation surface cleaner such as a Hydro- hot water and a rotary agitation surface cleaner such as a Hydro-
Force SX-15 or SX-7. For tight spaces or especially sensitive Force SX-15 or SX-7. For tight spaces or especially sensitive
surfaces, use the Hydro-Force Gekko Hard Surface Extraction Tool, surfaces, use the Hydro-Force Gekko Hard Surface Extraction Tool,
or simply mop to rinse with clean warm or hot water. or simply mop to rinse with clean warm or hot water.

4. When area has been rinsed thoroughly, allow floor to dry. Accelerate 5. When area has been rinsed thoroughly, allow floor to dry. Accelerate
drying with air mover like the OmniPro OmniDry Air Mover. drying with air mover like the OmniPro OmniDry Air Mover.

Cleaning and Degreasing Concrete Floors
Grout Sealing Tools
Viper Peroxiblast Powder is a high performance,
alkaline, heavy-duty concrete, tile and grout cleaner
and degreaser that safely replaces mineral spirits
and chlorinated solvent-based heavy-duty concrete
degreaser products. Viper Peroxiblast Powder
penetrates concrete surfaces on contact to soften, lift,
and remove a wide range of oils, soils, and greases.

1. For normal soiling, mix 2 ounces of Viper
Peroxiblast Powder with one gallon of warm See page 140.

STONE CLEANING SYSTEM

A) PRESPRAY B) PRESSURE RINSE
For extra-heavy soil and grease, use
Viper Stone. Clean and rinse with the SX-15 and Viper 7
neutral rinse.
For common soil or greasy surfaces,
use Viper 7.
C) EDGING
For marble, limestone or other acid-
sensitive surfaces use Viper Stone. Use the Gekko stand-up tool and various SX-15, See page 137.
Stone, tile and grout chemicals. attachments for edging and direct blasting of
IMPORTANT: See pages 79-82. grout. Use the SX-7 for countertops or vertical
Dilute according to directions. Carefully surfaces.
read and follow all instructions on bottle.
D) DRY AND SEAL

Use Viper Prestige Water Based or Solvent
Based Sealers.

www.crwsupply.com SX-7 hand tool, See page 138.