Page 50 - Complete CRW Catalog

48 Mold Removers & Prevention

IAQ 5000 Stain Blocking IAQ 6000HD (Heavy Duty)
Primer Mold Resistant Coating -
White
Fiberlock IAQ 5000 is a quick drying, high
performance 100% acrylic latex coating Fiberlock IAQ 6000HD is a high-build,
CHEMICALS
specifically designed to prime stained or mold-resistant coating designed to help
water damaged surfaces. This stain block- prevent mold growth from occurring in
ing primer provides exceptional adhesion new building construction. Fiberlock IAQ
and may be used on interior or exterior 6000HD is designed for use on building
surfaces to seal porous surfaces, provide materials including gypsum wallboard, ori-
adhesion to hard and glossy surfaces, ented strand board (OSB), wood framing
and prevent most bleeding type stains. timbers, plywood, and any other surface
Fiberlock IAQ 5000 is recommended for where a flexible high-build mold-resistant
use on wallboard, plaster, sheetrock, coating is necessary. Fiberlock IAQ
masonry, wood, concrete, aluminum, and 6000HD contains dual EPA-registered,
galvanized metal. broad-spectrum fungicides to provide
maximum protection against mold growth
5 gallon pail CR666PL on the coating film.
5 gallon pail CR672PL
IAQ 1000 Mold
Remediation Cleaner Advanced Peroxide Cleaner

IAQ 1000 is a hydrogen peroxide Advanced Peroxide Cleaner is the most
based biodegradable, chlorine free advanced cleaner available for the res-
cleaner. IAQ 1000 is pH neutral, and toration and remediation professional.
contains an agent that will whiten It aggressively removes stains caused
and brighten while cleaning, but does by mold and mildew on porous, semi-
not contain bleach. IAQ 1000 comes porous and non-porous materials.
ready-to-use in a 5 gallon container.
(Sold in a case of 2) CR667CS
pail CR665PL Gallon CR667GL
Hydro Boost Quart CR661QT

On & Gone Fast Mold Gone 4 Good
Stain Remover
On & Gone™ is a fast mold stain remover for use Gone 4 Good™ is a high pH
on porous and nonporous surfaces. On & Gone surface protector, engineered
is an extremely effective remover of black mold to be used immediately after
stains from surfaces such as attic sheeting, left in a surface has been cleaned of
place wood framing, masonry, and other typical mold stains with On & Gone
surfaces where mold has appeared. Attics, crawl to prevent the regrowth of mold. Gone 4 Good permanently
spaces, and wall cavities are typical application bonds to surfaces such as attic sheeting, left in place wood
sites. On & Gone is part of a remediation protocol framing, masonry, and other typical surfaces where mold
which includes Hepa vaccuuming of fruiting mold, stains have been cleared from. Attics, crawl spaces, and
disinfection of the surface, removal of black stains wall cavities are typical application sites.
and encapsulation.
RTU pH = 12.0 gallon 1631-5412 1 kg package 1637-5610

OSR Dry

OSR Dry™ is an extremely effective remover of black mold stains from surfaces such as attic sheeting, left
in place wood framing, masonry, and other typical surfaces where mold has appeared. OSR Dry is part of a
remediation protocol which includes Hepa vaccuuming of fruiting mold, disinfection of the surface, removal of
black stains and encapsulation. OSR Dry is not affected by extreme heat in summer or cold in winter. Its shelf
life is indefinite when not mixed with water, and will remain stable for a significant period of time when mixed.

RTU pH = 11.0 800 gram jar 1606-5169
www.crwsupply.com